Skip to main content
siemens-new.png

Siemens Siemens 1LE23213AB112AA3

2516508.jpg

Description

Industry Description

LOW-VOLTAGE MOTOR, NEMA 3 PHASE SQUIRREL CAGE MOTOR SEVERE DUTY SD100 CAST-IRONHOUSING MNP EFFICIENCY, TEFC (IP54) 4 POLE * FS 324T 40 HP (60 HZ) 460V STD, 60HZ FOOT MOUNTED F-1,2 WITHOUT WINDING PROTECTION FLOOR F-1

Modified Industry Description

MOTOR,40,1800,SD100,460,324T,NP

AD Description

Siemens 1LE23213AB112AA3 Type SD100 4-Pole Continuous Duty NEMA Low Voltage Standard AC Motor, Application Type: Severe Duty Motor, TEFC/IP54 Enclosure, 40 hp, 460 VAC, 60 Hz, 3 Phase, 324T Frame, 1800 rpm Speed, Foot Mount

Vendor Description

SD100 severe duty TEFC motors are available in two configurations they exceed NEMA Premium® efficiency with our exclusive, leading edge, die cast copper rotor design (143T -256T) or meet NEMA Premium® efficiency with our die cast aluminum rotor design. Either way, these motors significantly reduce operating costs and pay for themselves in a short time through energy savings. They are ideal for use in chemical processing, mining, foundry, pulp and paper, waste management and petro/chemical applications.

Specifications

Country of Origin
MX
Length1
38.6000
Special Features

  • A bi-directional, non-sparking fan is locked and keyed to the shaft
  • A unique stator core design lowers flux density while increasing cooling capacity
  • Alemite® grease fittings on the inlets and pipe plugs on the relief ports for ease of routine maintenance
  • All motors are equipped with drive end and opposite drive end shaft V-ring slingers for added bearing protection
  • Cast iron construction for exceptional structural integrity and corrosion resistance, equipped with integrally cast feet
  • Cast iron construction, polycarbonate fan, zinc plated hardware, epoxy enamel paint and stainless steel nameplate resist rust and corrosion
  • Cast iron fan covers are provided on all frame sizes
  • Condensation T-drains provided
  • Each rotor assembly is dynamically balanced for extended bearing life and includes a high strength carbon steel (C1045) shaft for maximum rotor performance
  • Insulation system meets or exceeds NEMA MG1-2006, Part 31 making all motors suitable for operation with adjustable frequency drives
  • Its design reduces windage losses, improves air flow, reduces noise and provides dependable cooling
  • Large conductor cross section reduces resistance and lowers stator losses
  • Manufactured with premium electrical grade steel laminations and copper electrical magnet wire to reduce losses and improve efficiencies
  • Oversized cast iron construction that is larger than industry standards, diagonally split, neoprene gasketed and rotatable in 90 deg increments for quick and easy connections
  • Proprietary inverter rated class F non-hygroscopic insulation system with NEMA class B temperature rise at 1.0SF provides an extra margin of thermal life
  • Provisions for Inpro/Seal® bearing isolators are standard on both ends
  • Regreasable, oversized double shielded (143T to 256T)/single shielded (284T to S449T) with cast iron inner caps on both ends of the motor
  • Specially formulated, high temperature tested, polyurea based grease
  • Varnish system application ensures maximum wire penetration to provide protection from moisture, corrosion and electrical shock
  • Without winding protection

Documents

Recently Viewed Products