Skip to main content
TPI enhanced.png

TPI TPI P3P5130CA1N

2264770.jpg

Description

Industry Description

Fan Forced Unit Heater, 3 PH, 30 KW, 480 V, Wall Mounting, Steel Housing Material, Dimensions- 29-1/4 Width X 34 Height X 10-1/16 Depth IN, BTU Rating- 102.4 (Per Hour), 36.2 AMP, Powder Coated Finish

Modified Industry Description

30KW 480V3P 5100 Series Unit Htr.

AD Description

TPI P3P5130CA1N 5100 3-Phase Fan Forced Standard Unit Heater, 102.4 Btu/hr Capacity, 480 VAC, 30 kW Power Rating

Specifications

Amperage Rating
36.2
Application
Indoor-Commercial/Industrial
Brand Name
TPI
Country of Origin
US
DimensionsInches
29-1/4 Width X 34 Height X 10-1/16 Depth IN
Finish
Powder Coated
Flow_Rate
2000/1800
Housing_Material
Steel
Model
P3P5130CA1N
Mounting
Wall
Phase
3
Special Features

  • All motors mounted with rubber insulators to minimize vibration and noise
  • All units come equipped with automatic reset type limit controls to de-energize the heater should an over temperature situation occur
  • Copper clad steel sheath element with continuously brazed steel fins formed to allow side draw through air flow
  • Fan over-ride purges unit of residual heat at shutdown
  • Heavy 18 ga welded steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation maintenance
  • Louvers are individually adjustable for directional control of air flow up to 15 deg from straight horizontal
  • Totally enclosed, 1-speed, 1-phase, permanently lubricated, thermally protected motors with unit bearings on 3 to 20 kW models
  • Unit heaters can be mounted for horizontal or vertical discharge
Standard
cETLus Listed;ABS Approved
Sub_Brand
TPI
Type
3-Phase Fan Forced Standard
Voltage Rating
480

Documents

Recently Viewed Products