Skip to main content
TPI enhanced.png

TPI TPI HF2B5107CA1L

2108885.jpg

Description

Industry Description

Fan Forced Unit Heater, 1/3 PH, 7.5, 5.6 KW, 240, 208 V, Wall Mounting, Steel Housing Material, Dimensions- 21-1/2 Width X 24-5/16 Height X 6-1/2 Depth IN

Modified Industry Description

7.5KW 240V 1/3P/5.6KW 208V 1/3P

AD Description

TPI HF2B5107CA1L 5100 1/3-Phase Fan Forced Standard Unit Heater, 25.6/19.2 Btu/hr Capacity, 208/240 VAC, 7.5/5.6 kW Power Rating

Specifications

Amperage Rating
27.1/31.3 A, 31.3/27.1 A
Application
Indoor-Commercial/Industrial
Brand Name
TPI
Country of Origin
US
DimensionsInches
21-1/2 Width X 24-5/16 Height X 6-1/2 Depth IN
Finish
Powder Coated
Flow_Rate
700
Housing_Material
Steel
Model
HF2B5107CA1L
Mounting
Wall
Phase
1/3
Special Features

  • All motors mounted with rubber insulators to minimize vibration and noise
  • All units come equipped with automatic reset type limit controls to de-energize the heater should an over temperature situation occur
  • Copper clad steel sheath element with continuously brazed steel fins formed to allow side draw through air flow
  • Fan over-ride purges unit of residual heat at shutdown
  • Heavy 18 ga welded steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation maintenance
  • Louvers are individually adjustable for directional control of air flow up to 15 deg from straight horizontal
  • Totally enclosed, 1-speed, 1-phase, permanently lubricated, thermally protected motors with unit bearings on 3 to 20 kW models
  • Unit heaters can be mounted for horizontal or vertical discharge
Standard
cETLus Listed;ABS Approved
Sub_Brand
TPI
Type
1/3-Phase Fan Forced Standard
Voltage Rating
240/208

Documents

Recently Viewed Products