Skip to main content
emerson-appleton-distributor-logo-gradient-horizontal.png

Appleton Appleton EYDEF50

2535120.jpg

Description

Industry Description

Explosionproof Rigid/IMC Conduit Seal, Type Drain, Turning Radius 1.25 Inch, Trade Size 1/2 Inch, Connection Type Female, Material Zinc Electroplated Chromate Epoxy Powder Coated Malleable Iron, Mounting Position Vertical, Enclosure Class I Div 1 and 2 Group A B C D, Class II Div 1 and 2 Group E F G, Class III, Approval UL 886/E10444, CSA C22.2, Size 3.69 Inch L x 1.5 Inch W, Constructional Feature Explosionproof, Dust-Ignitionproof, Raintight, Used On Threaded Rigid/IMC Metal Conduit

Modified Industry Description

1/2 EYDEF SEALING UNILET

AD Description

Appleton® UNILETS® EYDEF50 Dust-Ignitionproof Explosionproof Raintight Conduit Sealing Fitting, 1/2 in, For Use With IMC/Threaded Rigid Metallic Conduit, Malleable Iron, Triple Coated

Specifications

Country of Origin
MX
Dimensions
3.69 in L x 1.5 in W
Finish
Triple Coated
Length1
6.5000
Material
Malleable Iron
Series
EY Series
Size
1/2
Special Features

  • 40% fill expanded fill sealing fittings for close turning radius
  • Accurately tapped, tapered NPT threads for tight, rigid joints and ground continuity
  • Chromate/epoxy powder coated/zinc electroplated finish
  • Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub
  • Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location
  • Required in Class I, Division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps
  • Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36 in or less conduit, seal must be located within 18 in of either enclosure
  • Required in Class I, Division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures
  • Required where cables which exceed rate of gas or vapor transmission permitted for seals are used in Class I, Division 2 locations
  • Restrict any explosion to the sealed off enclosure
  • Smooth, rounded integral bushing in each hub to protect conductor insulation
Type
Dust-Ignitionproof Explosionproof Raintight

Recently Viewed Products