Skip to main content
TPI enhanced.png

TPI TPI G1G5105N

2503131.jpg

Description

Industry Description

Fan Forced Unit Heater, 1 PH, 5 KW, 277 V, Wall Mounting, Steel Housing Material, Dimensions- 14-15/32 Width X 17-3/4 Height X 6-1/2 Depth IN, BTU Rating- 17.1 (Per Hour), 18.1 AMP, Air Flow- 400 CFM

Modified Industry Description

5KW 277V 1P 5100 SERIES UNIT HTR.

AD Description

TPI G1G5105N 5100 1-Phase Fan Forced Standard Unit Heater, 17.1 Btu/hr Capacity, 277 VAC, 5 kW Power Rating

Specifications

Amperage Rating
18.1
Application
Indoor-Commercial/Industrial
Country of Origin
US
Dimensions
17-3/4 in H x 14-15/32 in W x 6-1/2 in D
Finish
Powder Coated
Frequency_Rating
50/60
Length1
18.0000
Material
Steel
Mounting
Wall
Mounting_Type
Wall
Phase
1
Power_Rating
5
Series
5100
Special Features

  • All motors mounted with rubber insulators to minimize vibration and noise
  • All units come equipped with automatic reset type limit controls to de-energize the heater should an over temperature situation occur
  • Copper clad steel sheath element with continuously brazed steel fins formed to allow side draw through air flow
  • Fan over-ride purges unit of residual heat at shutdown
  • Heavy 18 ga welded steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation maintenance
  • Louvers are individually adjustable for directional control of air flow up to 15 deg from straight horizontal
  • Totally enclosed, 1-speed, 1-phase, permanently lubricated, thermally protected motors with unit bearings on 3 to 20 kW models
  • Unit heaters can be mounted for horizontal or vertical discharge
Standard
cETLus Listed;ABS Approved
Sub_Brand
TPI
Temperature_Rating
40
Type
1-Phase Fan Forced Standard
Voltage Rating
277
Wattage
5,000

Documents

Recently Viewed Products