Skip to main content
emerson-appleton-distributor-logo-gradient-horizontal.png

Appleton Appleton EYDM100AL

2440394.jpg

Description

Industry Description

UNILETS EYDM Series 25 PCT Fill Vertical Conduit Drain Sealing Fitting With Removable Nipple, Size: 1 IN, Material: Almag 35 Aluminum, Finish: Epoxy Powder Coat, Connection: Tapered MNPT X Tapered FNPT, Turning Radius: 2.06 IN, Length: 4.06 IN, Width: 1.56 IN, Standard: UL 886 (1203), UL File Number E10444, CSA C22.2 No. 30, CSA 065181, UL Listed For Class I, Groups B, C, D, Class II, Groups E, F, G, And Class III, For Use With Threaded Rigid Metal Conduit and IMC

Modified Industry Description

DRAIN SEALING FITTING ALMAG 35

Specifications

Application
For Use With Threaded Rigid Metal Conduit And IMC
Brand Name
Appleton
Connection
Tapered MNPT X Tapered FNPT
Country of Origin
MX
Finish
Epoxy Powder Coated
Material
Almag 35 Aluminum
Special Features

  • 25% fill vertical conduit drain sealing fittings
  • Access cover has drain valve for automatic draining of water accumulation above the seal
  • Accurately tapped, tapered NPT threads for tight, rigid joints and ground continuity
  • Close radius type for sealing vertical conduit runs
  • Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub
  • Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location
  • Required in Class I, Division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps
  • Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36 in or less conduit, seal must be located within 18 in of either enclosure
  • Required in Class I, Division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures
  • Required where cables which exceed rate of gas or vapor transmission permitted for seals are used in Class I, Division 2 locations
  • Restrict any explosion to the sealed off enclosure
  • Smooth, rounded integral bushing in each hub to protect conductor insulation
  • Tapered MNPT X tapered FNPT connection
Standard
UL 886 (1203), UL File Number E10444, CSA C22.2 No. 30, CSA 065181, UL Listed For Class I, Groups B, C, D; Class II, Groups E, F, G; and Class III
Sub_Brand
Appleton
Type
Dust-Ignitionproof Explosionproof Raintight

Documents

Recently Viewed Products