Skip to main content
TPI enhanced.png

TPI TPI G1G5107CA1L

2391322.jpg

Description

Industry Description

Fan Forced Unit Heater, 1 PH, 7.5 KW, 277 V, Wall Mounting, Steel Housing Material, Dimensions- 21-1/2 Width X 24-5/16 Height X 6-1/2 Depth IN, BTU Rating- 25.6 (Per Hour), 27.1 AMP, Air Flow- 700 CFM

Modified Industry Description

7.5KW 277V 1P 5100 SERIES UNIT HTR.

AD Description

TPI G1G5107CA1L 5100 1-Phase Fan Forced Standard Unit Heater, 25.6 Btu/hr Capacity, 277 VAC, 7.5 kW Power Rating

Specifications

Application
Indoor-Commercial/Industrial
Country of Origin
US
Dimensions
21-1/2 X 24-5/16 X 6-1/2 Dept
Length1
26.0000
Mounting
Wall
Phase
1
Special Features

  • All motors mounted with rubber insulators to minimize vibration and noise
  • All units come equipped with automatic reset type limit controls to de-energize the heater should an over temperature situation occur
  • Copper clad steel sheath element with continuously brazed steel fins formed to allow side draw through air flow
  • Fan over-ride purges unit of residual heat at shutdown
  • Heavy 18 ga welded steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation maintenance
  • Louvers are individually adjustable for directional control of air flow up to 15 deg from straight horizontal
  • Totally enclosed, 1-speed, 1-phase, permanently lubricated, thermally protected motors with unit bearings on 3 to 20 kW models
  • Unit heaters can be mounted for horizontal or vertical discharge
Standard
cETLus Listed;ABS Approved
Sub_Brand
TPI
Type
Fan Forced
Voltage Rating
277
Wattage
7.5k

Documents

Recently Viewed Products