Skip to main content
emerson-appleton-distributor-logo-gradient-horizontal.png

Appleton Appleton EYSF125

1809170.jpg

Description

Industry Description

UNILETS EYS Series 25 PCT Fill Vertical Conduit Sealing Fitting, Size: 1-1/4 IN, Material: Malleable Iron, Finish: Triple-Coat (Zinc Electroplate, Chromate And Epoxy Powder Coat), Connection: Tapered FNPT, Turning Radius: 2.94 IN, Length:

Modified Industry Description

1-1/4 MALL COND SEAL

AD Description

Appleton® UNILETS® EYSF125 Dust-Ignitionproof Explosionproof Raintight Conduit Sealing Fitting, 1-1/4 in, For Use With IMC/Threaded Rigid Metallic Conduit, Malleable Iron, Triple Coated

Vendor Description

These Appleton® sealing fittings minimize the passage of gases and vapors and prevent the passage of flames from one portion of a conduit system to another. They prevent pressure piling within conduit system and contain any explosion that occurs. The EYS series is used for sealing vertical conduit, and provides a large opening for damming and filling.

Specifications

Application
For Use With Threaded Rigid Metal Conduit And IMC
Connection
Tapered FNPT
Country of Origin
MX
Dimensions
5.06 in L x 2 in W
Finish
Triple Coated
Length1
5.3000
Material
Malleable Iron
Series
EYS
Size
1-1/4
Special Features

  • 25% fill vertical conduit sealing fittings
  • Accurately tapped, tapered NPT threads for tight, rigid joints and ground continuity
  • Chromate/epoxy powder coated/zinc electroplated finish
  • Large opening for damming and filling
  • Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub
  • Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location
  • Required in Class I, Division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps
  • Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36 in or less conduit, seal must be located within 18 in of either enclosure
  • Required in Class I, Division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures
  • Required where cables which exceed rate of gas or vapor transmission permitted for seals are used in Class I, Division 2 locations
  • Restrict any explosion to the sealed off enclosure
  • Smooth, rounded integral bushing in each hub to protect conductor insulation
  • Tapered FNPT connection
Standard
UL 886 (1203), UL File Number E10444, CSA C22.2 No. 30, CSA 065181
Sub_Brand
Appleton
Type
Dust-Ignitionproof Explosionproof Raintight

Documents

Recently Viewed Products