CCA182

Upon completion of this course, given a wired PowerFlex® 750-Series drive (PowerFlex 753 or PowerFlex 755) and AC motor, you will be able to properly install the drive, start up the drive, and configure drive parameters to meet application-specific needs. Throughout the course, you will have the chance to use a variety of hardware and software tools, including: • The A6 LCD HIM • Connected Components Workbench™ software • DriveExecutive™ software After each demonstration, you will be given exercises that offer extensive hands-on practice using a PowerFlex 753 or PowerFlex 755 drive. This two-day course can be taken as a standalone course, or it can be taken in conjunction with other courses in the PowerFlex 7-Class curriculum to further broaden skills development.

Class Detail/Register

 CCA183

This skill-building course introduces concepts and techniques that will assist you in successfully maintaining and troubleshooting a PowerFlex 750-Series (PowerFlex 753 or PowerFlex 755) drive. You will learn how to recognize PowerFlex 750-Series drive hardware and properly wire the drive. You will also learn to diagnose specific faults. You will have the chance to use a variety of maintenance and troubleshooting tools, including the A6 LCD HIM, DriveExplorer™ software, and DriveExecutive™ software.

Class Detail/Register

CCP300

This accelerated course is for individuals who can quickly learn and apply Logix5000™ concepts, terminology, hardware troubleshooting skills, and interpretation of ladder logic in a Studio 5000 Logix Designer® project.  Important: Before registering please review all required course prerequisites on the attached Course Description PDF or Training Details page.

Class Detail/Register

CCP299

Upon completion of this course, you should be able to troubleshoot a previously operational ControlLogix system and restore normal operation. You will develop and practice these skills by learning basic concepts and terminology used with ControlLogix system hardware and Studio 5000 Logix Designer application. Additionally, you will develop these skills by practicing a systematic strategy for diagnosing and troubleshooting problems, along with performing hands-on exercises.

Class Detail/Register

RS-FTHSEC

This course will provide you with an overview of the various FactoryTalk® Historian tools for collecting data. You will learn how to configure a FactoryTalk Historian Site Edition system.

The course also covers how to use Microsoft Excel to create and modify FactoryTalk Historian tags. During the course, you will learn how to apply exception and compression to filter data to be archived. Also, you will be given an opportunity to compare the use of Polled versus Advised data collection modes. Data buffering, layers/methods of redundancy, archive management and backup will also be covered.

Upon completion of the course, you will have gained exposure to the many aspects of the FactoryTalk Historian system and be able to configure FactoryTalk Historian to collect data.

Class Detail/Register

CCP250

This accelerated course is for individuals who can quickly learn and apply Logix5000™ concepts, terminology, hardware, and the Studio 5000 Logix Designer® programming environment.This course prepares you for the Accelerated Logix5000 Programmer Certificate Course Level 1 certificate exam, which is included in the course price.  Important: Before registering please review all required course prerequisites on the attached Course Description PDF or Training Details page.

Class Detail/Register

CCV204-A

This course is a skill-building course that provides you with the skills necessary to develop FactoryTalk® View Machine Edition (ME) applications that run on the next-generation PanelView™ Plus terminals. This course provides opportunities to work with both the software and hardware. During class, you will gain the hands-on skills required to prepare a PanelView Plus terminal for operation. You will also work with FactoryTalk View ME software and RSLinx® Enterprise software and will practice downloading FactoryTalk View ME applications to a PanelView Plus terminal.

Class Detail/Register

CCP146

After completing this course, you should be able to perform basic ControlLogix and Studio 5000 Logix Designer™ tasks, such as creating and configuring a project as well as communicating with a controller. This course will assist you in developing and building a solid foundation with a fundamental knowledge of ControlLogix® and other Logix5000™ systems.

Class Detail/Register

CCP151

This is a skill-building course that provides you with the resources and hands-on practice required to program basic ladder logic instructions for any Logix5000™ controller. You will have an opportunity to use the Studio 5000 Logix Designer™ application to perform basic software tasks to meet the requirements of a given functional specification as well as set up a sequencer to run equipment through a predefined procedure and separate production procedure from equipment control.

Class Detail/Register

CCP182

After completing this course, you should be able to demonstrate understanding of basic Ethernet networking skills, terminology and concepts as well as apply these skills when performing advanced network specification, configuration and troubleshooting tasks. In this course, you will learn how to verify communications between devices, recognize data transmission types and differentiate between OSI Model Layer 2 and Layer 3 switching functions.

Class Detail/Register

CCP183

You will troubleshoot an EtherNet/IP network’s media and components (including the Stratix 5700 switch); run diagnostic tests to resolve system and port issues; and perform common functions such as resetting the switch.

Class Detail/Register

CCP143

Upon completion of this course, given a functional specification for a Logix5000 application, you should be able to develop a project to meet the requirements of the specification. This course covers tasks common to the following controllers, which all use the Logix5000 control engine, or operating system: ControlLogix® controllers, CompactLogix™ controllers, and SoftLogix™ controllers.

Class Detail/Register

CCP299

Upon completion of this course, you should be able to troubleshoot a previously operational ControlLogix system and restore normal operation. You will develop and practice these skills by learning basic concepts and terminology used with ControlLogix system hardware and Studio 5000 Logix Designer application. Additionally, you will develop these skills by practicing a systematic strategy for diagnosing and troubleshooting problems, along with performing hands-on exercises.

Class Detail/Register

SAF-LOG104

Upon completion of this course, you will be able to create a Studio 5000 Logix Designer® project for a GuardLogix® system and troubleshoot a previously operational GuardLogix® system.

Class Detail/Register

CCP300

This accelerated course is for individuals who can quickly learn and apply Logix5000™ concepts, terminology, hardware troubleshooting skills, and interpretation of ladder logic in a Studio 5000 Logix Designer® project.  Important: Before registering please review all required course prerequisites on the attached Course Description PDF or Training Details page.

Class Detail/Register

EMS-230

This course provides information on the concepts associated with systematic troubleshooting of instrumentation systems. Participants use practical application of troubleshooting techniques in exercise scenarios.

Class Detail/Register

CCV207

Upon completion of this course, you should be able to organize and develop FactoryTalk® View Site Edition (SE) applications. This course provides opportunities for you to work with local FactoryTalk View SE applications. During class, you will have the opportunity to practice the skills used to create an application and build graphic displays. You will learn how to configure alarms and security, trend data, and test your application using FactoryTalk View SE Client. You will also work with RSLinx® Enterprise communications software and the FactoryTalk Diagnostics system. After practicing these skills in a local application, you will receive a high-level overview of how a network application is created.

Class Detail/Register