Skip to main content
TPI enhanced.png

TPI TPI F3F5125CA1L

2400937.jpg

Description

Industry Description

Fan Forced Unit Heater, 3 PH, 25 KW, 208 V, Wall Mounting, Dimensions- 29-1/4 Width X 34 Height X 10-1/16 Depth IN, Steel Housing Material, BTU Rating- 85.3 (Per Hour), 69.5 AMP, Air Flow- 2000/1800 CFM

Modified Industry Description

25KW 208V 3P 5100 SERIES UNIT HTR.

AD Description

TPI F3F5125CA1L 5100 3-Phase Fan Forced Standard Unit Heater, 85.3 Btu/hr Capacity, 208 VAC, 25 kW Power Rating

Specifications

Application
Indoor-Commercial/Industrial
Country of Origin
US
Dimensions
29-1/4 X 34 X 10-1/16 Dept
Length1
35.0000
Mounting
Wall
Phase
3
Special Features

  • All motors mounted with rubber insulators to minimize vibration and noise
  • All units come equipped with automatic reset type limit controls to de-energize the heater should an over temperature situation occur
  • Copper clad steel sheath element with continuously brazed steel fins formed to allow side draw through air flow
  • Fan over-ride purges unit of residual heat at shutdown
  • Heavy 18 ga welded steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation maintenance
  • Louvers are individually adjustable for directional control of air flow up to 15 deg from straight horizontal
  • Totally enclosed, 1-speed, 1-phase, permanently lubricated, thermally protected motors with unit bearings on 3 to 20 kW models
  • Unit heaters can be mounted for horizontal or vertical discharge
Standard
cETLus Listed;ABS Approved
Sub_Brand
TPI
Type
Fan Forced
Voltage Rating
208
Wattage
25k

Documents

Recently Viewed Products