Skip to main content

NSI NSi IPLMD250-6

2248610.jpg

Description

Industry Description

6 Wire Polaris 250 MCM-6 AWG Insulated Multi-Cable Connector with Mounting Holes, Either Side Wire Entry Polaris Insulated Multi-Cable Connectors have wire entry ports on both sides of the connector to allow for access from either side. Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway. IPLMD Series connectors are insulated with high-dielectric strength plastisol. Molded for precise fit and supplied with removable access plugs over the hex screws. Eliminates the need for cover and taping. Abrasion and chemical resistant. UV resistant. Will not support combustion. Mounting holes will accept a 1/4" bolt for 3/0 AWG and a 5/16" bolt for 250 MCM and 350 MCM. UL Listed 486B Wire Connector. AL9CU. Cold temperature rated to -45 degrees C, rated 600V, 90 degrees C. Dual rated for use with copper and/or aluminum cables. Not recommended for fine-stranded, flexible wire.

Modified Industry Description

250 MCM - 6 AWG POLARIS INSULATED

AD Description

NSI Polaris™ IPLMD250-6 Double Sided Entry Insulated Multi-Tap Connector With Mounting Hole, 6 AWG to 250 kcmil Aluminum/Copper Conductor, Plastisol

Vendor Description

Polaris™ in original black. The centerpiece of NSI incredible product offering, Polaris™ in original black is the insulated connector that every other connector copies. Its introduction marked the beginning of a new age, providing the fastest, safest, most professional connection possible.

Specifications

Application
Wire Termination
Brand Name
NSi
Cable_Entry
2 Side Entry
Color
Black
Conductor Type
Aluminum/Copper
Conductor Size
6 AWG to 250 kcmil
Country of Origin
USA
Finish
Black
Material
Plastisol
Maximum_Wire_Gauge
250
Minimum_Wire_Gauge
6
Model
IPLMD
Number_Of_Poles
1
Number_Of_Ports
6
Package_Quantity
1
Size
L=7.010 - W=2.280 - H=2.370
Special_Features

  • Dual rated multi-conductor with mounting holes for use with copper and/or aluminum cables
  • Eliminates the need for cover and taping
  • Insulated with dielectric strength plastisol for tough mechanical protection
  • Molded for precise fit and supplied with removable access plugs over the hex screws
  • Mounting holes at each end of the connector allow for direct isolated mounting to the trough, panel or wireway
  • Mounting holes will accept a 1/4 in bolt for 3/0 AWG and a 5/16 in bolt for 250 kcmil and 350 kcmil
  • Not recommended for fine stranded, flexible wire
  • Will not support combustion
  • Wire entry ports on both sides of the connector to allow for access from either side

Standard
cULus
Sub_Brand
NSi
Temperature_Rating
-45 to 90
Type
Double Sided Entry
Voltage Rating
600
Wire_Type
Class B & C

Recently Viewed Products

Loading recently viewed products...
Loading product details...