Skip to main content
TPI enhanced.png

TPI TPI F1F5103N

2185063.jpg

Description

Industry Description

Fan Forced Unit Heater, 1 PH, 3.3 KW, 208 V, Wall Mounting, Dimensions- 14-15/32 Width X 17-3/4 Height X 6-1/2 Depth IN, Steel Housing Material, BTU Rating- 11.2 (Per Hour), 15.9 AMP, Air Flow- 400 CFM

Modified Industry Description

3.3KW 208V 1P 5100 Series Unit Htr.

AD Description

TPI F1F5103N 5100 1-Phase Fan Forced Standard Unit Heater, 11.2 Btu/hr Capacity, 208 VAC, 3.3 kW Power Rating

Specifications

Amperage Rating
15.9
Application
Indoor-Commercial/Industrial
Brand Name
TPI
Country of Origin
US
DimensionsInches
14-15/32 Width X 17-3/4 Height X 6-1/2 Depth IN
Finish
Powder Coated
Flow_Rate
400
Housing_Material
Steel
Model
F1F5103N
Mounting
Wall
Phase
1
Special Features

  • All motors mounted with rubber insulators to minimize vibration and noise
  • All units come equipped with automatic reset type limit controls to de-energize the heater should an over temperature situation occur
  • Copper clad steel sheath element with continuously brazed steel fins formed to allow side draw through air flow
  • Fan over-ride purges unit of residual heat at shutdown
  • Heavy 18 ga welded steel cabinet with powder coated finish and control compartment housing a master terminal board with a hinged and latched access door, simplifying wiring, installation maintenance
  • Louvers are individually adjustable for directional control of air flow up to 15 deg from straight horizontal
  • Totally enclosed, 1-speed, 1-phase, permanently lubricated, thermally protected motors with unit bearings on 3 to 20 kW models
  • Unit heaters can be mounted for horizontal or vertical discharge
Standard
cETLus Listed;ABS Approved
Sub_Brand
TPI
Type
1-Phase Fan Forced Standard
Voltage Rating
208

Documents

Recently Viewed Products