Skip to main content

Ge Industrial GE Industrial THQP120

1770097.jpg

Description

Industry Description

THQP breakers are a smaller, smarter solution for today's cost- and quality-conscious contractors and homeowners. Half the width of standard breakers, they allow use of smaller load centers and for maximum savings of space and money. GE is the only manufacturer that gives you this cost advantage without sacrificing flexibility. THQP breakers are one-half the width of standard GE breakers but identical in design. They are available from 15 to 50 amps and in single and two pole construction. P120 Amps 20 A

Modified Industry Description

20A 120/240V - THQP 1 POLE CIRCUIT BREAKER

AD Description

GE Q-Line® THQP120 Type THQP Compact Molded Case Circuit Breaker, 240 VAC, 20 A, 10 kA Interrupt, 1 Poles, Non-Interchangeable/Thermal Magnetic/LI Trip

Vendor Description

THQP breakers are a smaller, smarter solution for today's cost and quality conscious contractors and homeowners. Half the width of standard breakers, they allow use of smaller load centers and for maximum savings of space and money. GE is the only manufacturer that gives you this cost advantage without sacrificing flexibility. THQP breakers are one half the width of standard GE breakers but identical in design. They are available from 15 to 50 A and in 1 and 2-pole construction.

Specifications

Amperage Rating
20
Brand Name
GE Industrial
Color
Black
Connection
14-8 kcmil / 12-8 kcmil
Country of Origin
UKN
Frame
Q-Line
Frequency_Rating
50/60
Interrupt_Rating
10
Load_Rating
HACR/SWD
Material
Plastic
Mounting
Plug In
Number_Of_Poles
1
Phase
1
Poles
1
Special Features

  • 10 kA at 120 VAC, 10 kA at 120/240 VAC interrupt rating
  • Arc chutes of heat absorbing, insulating material and metal grid plates quickly ''extinguish'' arcs
  • Common trip bar assures instant disconnect of all conductors when an overload or short circuit occurs on any one conductor in the circuit or an accessory trip device operates
  • Molded case is molded from high mechanical and high dielectric strength engineered plastic
  • Quick-make, quick-break, trip-free mechanism minimizes arcing during breaker operation, contacts cannot be ''teased'' into position
  • Silver alloy contacts combine the conductive properties of silver with other elements for clean, positive electrical contacting, pitting and burning are minimized for longer contact life
  • Trip indication is shown by handle position midway between on and off, to reset the trip mechanism, move the handle to extreme off, then to on position
  • Trip-free mechanism is independent of manual handle control, the breaker trips under short circuit or overload, even though the operating handle is held in on position
  • UL listed lugs for copper or aluminum cable, at full frame rating, easy access and simple, straight-in wiring
  • VERIFIER™ "Twist-to-Trip" and ''Push-to-Trip'' mechanically simulates over current tripping through actuation of linkages not operated by the on-off handle
Standard
E11592
Sub_Brand
GE
Trip_range
Non-Interchangeable
Trip_Type
LI/Non-Interchangeable/Thermal Magnetic
Type
Type THQP Compact
Voltage Rating
240
Width_2
10.7500
Width_3
36.0000

Documents

Recently Viewed Products